top of page
Linus Projects Logo

Waste Oil Recycling Machine: 5, 10 and 20 TPD Batch Plants

2 days ago
8 min read

A waste oil recycling machine for a small collection network has one job: turn the used engine oil you collect into something worth more than fuel. LINUS PROJECTS (INDIA) builds three machines for this, the LP-WOD-5B, LP-WOD-10B and LP-WOD-20B. They are batch vacuum distillation plants that re-refine 5, 10 and 20 tonnes of used oil a day into light and heavy Group I base oil, with light fuel and asphalt residue as by-products.

This guide sets out what each machine produces, how much used oil it needs, the space, crew and delivery time it takes, and how to choose between them. For larger plants, compare the full LP-WOD range from 5 to 200 TPD.

Key takeaways

  • Three batch models for 5, 10 and 20 TPD of used oil: about 1,500, 3,000 and 6,000 tonnes a year on 300 operating days.

  • Base oil is the main product: about 4,050, 8,100 and 16,200 litres a day of light (SN-150 type) and heavy (SN-350/500 type) Group I base oil.

  • No acid and no clay: all three finish the oil with LINUS RMP regenerative polishing.

  • A plant plot from about 600 m² to 1,500 m², and a crew from 2 operators and 1 helper per shift.

  • Supplied as prefabricated, pre-wired, factory-tested skid modules: 120 to 135 days ex-works and 26 to 30 weeks from order to hand-over.

Base oil or fuel: two kinds of waste oil recycling machine

Most machines sold as a waste oil recycling machine make fuel. They settle and filter used motor oil, or crack it by pyrolysis, into burner fuel or diesel-range fuel, and recover no base oil. A re-refining machine recovers the base oil itself, the most valuable part of every litre, so that it can be blended into new lubricants again. Base oil normally sells well above fuel prices.

The LP-WOD batch plants are re-refining machines. Base oil is 68 to 73 % of the wet feed, and the light fuel and asphalt residue are by-products. More on the difference: used oil recycling plant or re-refining plant?

The three LINUS small waste oil recycling machines

All three use the same process and make the same base oil grades. They differ in batch size, heating and output.

Model

LP-WOD-5B

LP-WOD-10B

LP-WOD-20B

Used oil feed

5 TPD (≈ 5.7 KLPD)

10 TPD (≈ 11.5 KLPD)

20 TPD (≈ 23 KLPD)

Used oil per year

≈ 1,500 t

≈ 3,000 t

≈ 6,000 t

Operation

One 5 t batch a day

One 10 t batch a day

Two 10 t batches a day, twin still

Base oil per day

≈ 4,050 L

≈ 8,100 L

≈ 16,200 L

Base oil per year

≈ 1,060 t

≈ 2,115 t

≈ 4,230 t

Heating

Electric; thermic fluid heater optional

Electric; thermic fluid heater optional

Thermic fluid heater on the plant's own light fuel

Plot (plant only)

≈ 600 m²

≈ 900 m²

≈ 1,500 m²

Crew per shift

2 operators + 1 helper

3 operators + 1 helper

3 operators + 2 helpers

Ex-works delivery

120 days

120 days

135 days

Order to hand-over

about 26 weeks

about 28 weeks

about 30 weeks

Per year on 300 operating days. Typical figures for standard designs on dry, specification feed; your offer confirms the guaranteed values for your feed analysis and site.

LP-WOD-5B: 5 TPD entry-level machine

The 5B is the entry-level re-refinery for first-time operators and small collection networks. It runs one 5 tonne batch a day through a vacuum still with a packed re-refining column and reflux, followed by LINUS RMP polishing. It heats electrically, with a thermic fluid heater as an option, and makes about 4,050 litres of base oil a day, or about 1,060 tonnes a year. The plant needs about 600 m² and 2 operators and 1 helper per shift.

LINUS LP-WOD-5B 5 TPD waste oil recycling machine: compact batch re-refining module with receiver and vacuum pump skid

LP-WOD-5B: a compact batch module with receiver and vacuum pump skid, for indoor installation.

LP-WOD-10B: 10 TPD batch plant

The 10B is built around a 12.5 kL vacuum still with a packed re-refining column and reflux. It runs one 10 tonne batch a day and makes about 8,100 litres of base oil a day, or about 2,115 tonnes a year. Heating is electric, with a thermic fluid heater as an option. The plant needs about 900 m² and 3 operators and 1 helper per shift.

LINUS LP-WOD-10B 10 TPD batch used oil refinery machine: process structure with condenser, receivers and storage tank

LP-WOD-10B: process structure with condenser, receivers and storage tank.

LP-WOD-20B: 20 TPD twin-still plant

The 20B puts two 12.5 kL stills on one thermic fluid heater and staggers their batches, so it runs two 10 tonne batches a day: batch simplicity at semi-continuous output. The heater is fired on the plant's own light fuel. It makes about 16,200 litres of base oil a day, or about 4,230 tonnes a year, on a plot of about 1,500 m² with 3 operators and 2 helpers per shift.

LINUS LP-WOD-20B 20 TPD twin-still waste oil recycling plant: process module with receivers and condensers

LP-WOD-20B: process module with receivers and condensers.

How a batch waste oil recycling machine works

Each batch is charged, heated, distilled and drained under a semi-automatic Siemens PLC sequence.

  1. Reception and pre-treatment. Tankers unload through a 200 µm duplex strainer into settling tanks, where free water and sludge settle out. A small dose of caustic, about 0.3 % at 60 to 80 °C, neutralises organic acids and helps fine solids settle.

  2. Dehydration. Water and light ends come off at 110 to 135 °C in the first part of the still's heating ramp.

  3. Light fuel recovery. The diesel-range light fuel is taken off next, by temperature switch-over.

  4. Vacuum distillation. The charge is heated under vacuum below 10 mbar to about 320 °C at the end of the batch. A packed re-refining column with reflux splits a light base oil (LBO, SN-150 type) from a heavy base oil (HBO, SN-350/500 type).

  5. Polishing. The distillate percolates through activated adsorbent media in the LINUS RMP columns at 80 to 100 °C, removing colour, odour, acids and oxidation products. One column polishes while the other regenerates in place.

  6. Residue discharge. The asphalt residue left in the still is discharged and sold as a bitumen extender or heavy fuel, and the still is ready for the next charge.

Each stage is explained in more detail in how used engine oil is re-refined, step by step.

What 1,000 litres of used oil becomes

Typical shares of the wet feed in a batch plant:

  • Base oil: 68 to 73 %, about 680 to 730 litres, sold to lubricant blenders.

  • Light fuel: 6 to 8 %. The 20B fires its heater on it; the surplus is sold.

  • Asphalt residue: 14 to 17 %, sold as a bitumen extender or heavy fuel.

  • Water: 3 to 7 %, to effluent treatment.

  • Losses: 1 to 3 %, light ends and handling.

On dry feed the same base oil yield reads 72 to 77 %. When you compare machines, ask whether a figure is for base oil alone, and whether it is on wet or dry feed: how to compare base oil yield claims.

Base oil quality from a batch plant

Property (method)

LBO, SN-150 type

HBO, SN-350/500 type

Viscosity at 40 °C (ASTM D445)

27–32 cSt

65–110 cSt

Viscosity at 100 °C (ASTM D445)

5.0–5.5 cSt

8.5–11.5 cSt

Viscosity index (ASTM D2270)

90 min

90 min

Flash point, COC (ASTM D92)

200 °C min

230 °C min

Pour point (ASTM D97)

−9 °C max

−6 °C max

Colour (ASTM D1500)

L 2.5 max

L 3.5 max

Sulphur (ASTM D4294)

0.4 % max

0.5 % max

TAN (ASTM D664)

0.05 mg KOH/g max

0.05 mg KOH/g max

Typical guaranteed limits for standard designs on specification feed. If your buyers need lighter colour or sharper cuts, a continuous thin film plant makes SN-150 at L 1.5 max and SN-500 at L 2.5 max. Compare the two: thin film evaporator or batch still?

Which used oils can it process?

Used engine oils from cars, trucks, buses, two-wheelers and generators; gear, hydraulic, turbine, compressor and industrial oils; neat cutting oils; and mixed collections of these. Transformer oil is accepted only after PCB screening.

Not accepted: PCB-containing oils, chlorinated solvents and parts-washer fluids, brake fluid, glycol antifreeze, vegetable and ester oils in bulk, and water-based emulsions. Batch plants are very tolerant of variable or dirty feed, and every plant comes with a simple acceptance test kit and procedure.

How to choose between 5, 10 and 20 TPD

Size the machine on the used oil you can reliably collect within 300 to 500 km, not on the base oil you hope to sell.

  • LP-WOD-5B if you can collect about 1,500 tonnes a year, roughly 125 tonnes a month, and want the lowest entry cost into re-refining.

  • LP-WOD-10B for about 3,000 tonnes a year, roughly 250 tonnes a month.

  • LP-WOD-20B for about 6,000 tonnes a year, roughly 500 tonnes a month. It fires its heater on its own light fuel.

  • A continuous plant if your buyers want fractionated cuts with lighter colour, or you will process 20 TPD or more. The C-series starts at 10 TPD with the LP-WOD-10C and uses two-stage thin film evaporation.

A batch plant can grow with you. A thin film evaporator module can be added later without rebuilding the plant, and the modules can be unbolted and moved if your collection network changes.

What is included

Each machine is supplied as a complete plant, not a single unit:

  • Engineering: process design, mass and energy balance, PFD and P&IDs, plot plan, foundation-load drawings and the documents for your permits.

  • Prefabricated, pre-wired skid modules, built and factory-tested at our Ambernath works, with MCC and control panels and a Siemens PLC.

  • Laboratory equipment, first charges, commissioning spares and seaworthy export packing.

  • Erection supervision, commissioning, a 72-hour performance test run, and operator training at site and at our works.

  • A 12-month warranty, spares and RMP media supply, and remote troubleshooting.

The modules are built while your civil works go ahead, so site work is limited to setting them on foundations, bolting up, hook-up and commissioning. They are sized for road transport and for sea freight in containers or on flat racks.

Waste oil recycling machine price

There is no fixed list price. As the manufacturer, LINUS prices each plant for your capacity, scope of supply and site: the process plant alone, or turnkey with storage tanks, a thermic fluid heater, cooling tower, effluent treatment, laboratory, erection and commissioning. The batch plants have the lowest entry cost in the LP-WOD range.

When you compare offers, compare more than the price: base oil yield and colour, running cost per tonne, and time to production. A cheaper machine that makes less base oil, or darker base oil, costs more every month.

A manufacturer, not a trader

LINUS PROJECTS (INDIA) is a process plant engineering company founded in Mumbai in 2014, with ISO 9001:2015 and CE certification. It designs and builds its plants in its own works at Ambernath MIDC near Mumbai, with pressure vessels, columns and exchangers built to ASME Section VIII Division 1 and TEMA, and third-party inspection by Lloyd's, TÜV or SGS available. LINUS has supplied 240+ plants and machines to 48+ clients in India, Africa, the Middle East and Asia, and supports projects in West Africa and the Gulf through its Lagos office and UAE representative.

Frequently asked questions

What is the smallest LINUS waste oil recycling machine?

The LP-WOD-5B. It processes 5 tonnes of used oil a day, about 5.7 KLPD, in one batch and makes about 4,050 litres of Group I base oil a day.

Do these machines use acid or clay?

No. All three polish the distilled oil with LINUS RMP regenerative media columns instead of sulphuric acid and bleaching clay, so there is no acid sludge or oily spent clay to dispose of.

How long does delivery take?

Ex-works delivery is 120 days for the 5B and 10B and 135 days for the 20B. From order to hand-over takes about 26, 28 and 30 weeks.

What permits does a small re-refinery need in India?

Used oil is a hazardous waste under the Hazardous and Other Wastes (Management and Transboundary Movement) Rules, 2016. A re-refinery needs consent to establish and to operate and a hazardous waste authorisation from the State Pollution Control Board, and registration as a recycler on the CPCB portal. More in how to start a used oil re-refining business in India.

Get an offer for your machine

Tell us how much used oil you can collect, the oils you collect and your site location. We will recommend a model and send a techno-commercial offer with price, scope and delivery time.

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page

Unit 1 (Registered Office): Plot No. N-86/3, Bohonoli Village, Anand Nagar Additional MIDC, opp. CEAT Tyres, Ambernath (East), Maharashtra 421506, India

Unit 2 (Manufacturing Unit): Plot No. B-73/1, Jhambivali Village, Additional Ambernath MIDC, Ambernath (East), Maharashtra 421506, India